I’ve been wrenching on junky Jeeps for a while now, rebuilding AMC 360 V8 engines, replacing cracked cylinder heads on AMC straight-six enginesc, tuning carter W-0 carburetors on Willys Go-Devil motors, replacing synchros and bearings in manual transmissions, extracting broken exhaust studs, and on and on. While I’m far from an expert when it comes to internal combustion engine vehicle repair (given that I haven’t worked on much from this millennium), I’m ready to branch out. It’s time for an electric conversion. This won’t be cheap, and it won’t be easy. But it will be happening, and soon (ish). The first issue I need to tackle is: I have to decide which vehicle to use as a platform for the build. Here are my options:
The Rusty FC From Washington
Perhaps my greatest achievement in life occurred almost exactly a year ago when I resurrected the rusty, long-dead 1958 Willys FC-170 you see in the video above. I probably sacrificed seven years of life expectancy from all the mouse feces I inhaled (and we can’t forget the trenchfoot I got while sleeping in my Land Cruiser), but it was somehow worth it. Just look at that $1,500 monster off-road for seven hours straight after having sat on a farm for probably 20 years (at least).
Anyway, I fell in love with the blue FC during that trip, and it was my intention to use it as the basis for an EV conversion. There’s only one issue: Someone offered me a nicer (but sketchier) FC after seeing me wrench on this old rustbucket; I’ll show you that later.
For now, I’ll present the case for using this FC as the platform for my EV build:
It’s long, so there’s plenty of room for batteries. It’s wide. The frame is wider than that of the “stolen” Jeep, so I could fit a Tesla drive unit between the rails. The paperwork is all there. The frame is solid. It’s worthless, so I’m not foregoing much money by keeping it (more on cost later). It has “patina,” and is just generally interesting/compelling to look at/read about. I have a sentimental attachment to it after that epic trip.
Now for the cons:
It’s rusted out. To fix the body and make it look good would cost many thousands of dollars, which would far offset whatever money I save by selling the “stolen” Jeep and keeping this worthless one. If I spend $15,000 on the EV conversion, the Jeep will still only be worth a few grand, max. It’ll be lost money. The windshield is cracked. This will be expensive to replace, as the glass is curved; replacements are hard to find. The vehicle does run and drive as-is, so it’d be throwing out a working powertrain.
The ‘Stolen’ Jeep
This little red FC looks to be in decent shape. I bought it from a fairly sketchy seller in a more-than-fairly sketchy warehouse in suburban Michigan. The seller had seen my friends and me wrenching on ol’ blue, and figured maybe I wanted another. He figured right. I ignored about a thousand red flags and bought the short 1957 FC for $2,000. It came with no title, and it has no VIN. In other words, I cannot register this vehicle — at least not until I figure this paperwork thing out. I do have a line on a cheap 1957 old FC-150 being sold for parts, with a title; I could create a Ship Of Theseus situation and use the other Jeep’s paperwork… I met my red Jeep’s previous owner, a rambunctious 86 year-old man who lives on a farm in the middle of suburbia. It really is a bizzare place; here’s this older couple living in a small cottage on a few acres, and just on the other side of their fence sit dozens of condos and strip malls. This gentleman, a cranky but decent guy who still wrenches on his John Deere tractor, made it clear that his land would never fall to the developers. “I got all this land on a trust!” he exclaimed to me, clearly passionate about the issue. Anyway, none of that is really relevant, other than to indicate that I don’t actually think my FC was stolen. This older gentleman said he owned it for decades and gave it to the man who sold it to me. “You actually paid money for that piece of shit?” he asked me, angry with the guy he’d sold it to. “I can’t believe he charged you for that scrap.” I actually don’t think the Jeep is that bad. It sure looks nicer than the blue FC-170, even if much of its body is just patch panels lathered in Bondo:
Anyway, let’s talk about the pros and cons of using this thing as the basis for my electric vehicle build. First, the pros:
The body looks nice. The interior looks mostly done. The engine is already seized, so who cares if I throw it out. If I spend $15,000 converting this thing to an electric vehicle, it might still be worth some amount of money. I could recoup some of the costs if I sell it down the line, since it looks okay.
Now for the cons:
No title, no VIN. Registering this Jeep will be a pain in the arse. It’s short; room for batteries would be limited. It’s narrow, so fitting a Tesla drive unit between the frame rails could be a challenge. It’s a big lie; it looks nice, but much of it is riveted sheetmetal and bondo. I’d be foregoing the value of this Jeep (I’d guess it’s around $5,000) by selling the worthless blue Jeep instead.
It’s a tough choice. The blue Jeep has a great story behind it, and it has paperwork. It’s crappy, but it’s at least honest about it. Plus, if I sell the red Jeep, I’ll make $5,000. That’s not really much if you compare it to the $15,000 it might take to convert one of these Jeeps to electric. And certainly, if I plan to actually make the blue Jeep look nice, that’s going to cost another $5,000+ if I had to guess. So in the end, the blue Jeep would be pricier if I decided I wanted to fix it up. I could just keep it as-is, and have an EV-converted ol’ rustbucket. I kind of like the way it looks now, to be honest. Why does it have to be completely rust-free and nice to be worthy of an electric vehicle conversion? Maybe that’s a silly question.
I guess part of the issue could be that using a rough-looking Jeep as a basis for an electric vehicle conversion guarantees that the entire investment will be a moneypit. No matter how nice that blue Jeep drives, if it looks like it does, it may not be worth anything. But what if I don’t sell it? I could also just suck it up and do the bodywork on it; a nice EV-converted FC-170 would be worth something, I bet. Or I could just convert the red one and drive it as-is after I figure out the paperwork issue, and after I figure out how to fit a Tesla drive unit between those frame rails. Oh, and after I make sure it’s not completely made of Bondo. I really don’t know what the move is, here. Quiz maker https://www.icon4x4.com/derelict If you wanted to sell later on you might be able to find a lunatic like me who liked it better that way or you could spend the money to make it look a little nicer. I realize this may sound difficult but it’s worth thinking about! Personally i find if i think about a technical problem for awhile ,simple or cheap solutions come to mind ???? However, I think the best option would be to do at least a rough restoration of the blue FC , convert it to electric, and then donate its engine to the red FC. That would leave you with two half way decent FCs that each have some value. Could be fun to compare the two back to back as well. Start with the one with the best frame. However, recalling your video series on ol’blue (you better get that reference!), it didn’t seem like any part of that Jeep had two atoms of iron bonded without an additional three atoms of oxygen.
